*All New* SLT Low MKII Paramotor Harness - Low Hook-Up points - by Apco Aviation.
SuperLight (SLT) universal paramotor harness is the most advanced and feature packed paramotor harness on the market.
Designed for the optimal balance between maximum comfort and minimum weight, it will suit pilots who demand the absolute best.
The SLT Low will fit most low attachment paramotors on the market today, improving safety, ease of use and overall flying experience.
This new generation harness improves on all aspects.
The shape has been refined for additional comfort. A larger front flap has been incorporated for easier running and more support during flight.
Seat weight has been reduced using a lightweight polycomb material for the seat board and front flap.
Improved safety features have been incorporated, taking into account different frame geometries.
The shoulder covers are replaceable for wear and tear.
For paramotor manufacturers there is a custom branding option for the shoulder cover.
The main options available for SLT Low:
- Emergency parachute container can be zipped on either the left or right side of the harness.
- Additional accessory pocket can be zipped on either the left or right side of the harness.
- NEW Safety straps attach to the CG, running under the seat – will protect in case of any side arm failure - 4 different options to cover any paramotor
- NEW Ball bearing speed bar pulleys (smoother, lighter use of speed bar)
- Paramotor pod compatible
- Paramotor airbag compatible
- NEW Replaceable shoulder cover for custom branding
- NEW Replaceable abrasion resistant shoulder cover for replacement due to wear and tear or pull start cable damage
- Fuel gauge mirror.
- Wonderbar (speed bar)
*** Carabiners Not Included ***
What type of safety webbing do I need?
Choosing your safety webbing:
For Low Swing Arms (Pap, PXP, Kangook, Fly Products, ect.) - Safety webbing short, 12mm dyneema webbing (code: 80041)
For Mid Swing Arms (EVO Aviation, ParaJet, Kangook, Swan neck(Mini Plane), ect.) - Safety webbing long, 12mm dyneema webbing (code: 80042)
Choosing your carabiner connector webbing:
For Tube Arms (MiniPlane, R. Ultralight, Air-Conception - typical tube diameter 25mm) Carabiner loop, 12mm dyneema webbing (code: 44704)
For CNC Arms or Omega Shackle Connector (EVO Aviation, Fly Products, PXP, ParaJet, Kangoook, Scott, Yooda) Figure 8 connection for side arms with carabiner, 25mm polyester webbing. (code 80049)
Notes to ensure you have the correct setup:
Always do a hang check prior to flight.
If your safety webbing is too short:
-It will limit the side arm range of motion, reducing weight shift ability.
-It will make it harder to get into the seat after takeoff.
- It may alter the hang/thrust angle.
If your safety webbing is too long:
- In case of asymmetric arm failure, there will be a large difference in the carabiner heights between the two dies, leading to a dangerous weight shift turn.
